Ready-to-connect AC switch-plug combination for circular saws, stone cutting machine, shredders and similar hand-held power tools.
- 2-pole switch (Contactor)
- Switching capacity up to 3 kW
- Undervoltage release
- Connection possibility for thermal contact
- Including splash water proof cover
- 1 meter connection cable H07RN-F 4 G1,5
Installation / connection (refer to wiring diagram)
The switch is screwed on the housing base. Grid dimension of the screws: 68 x 68 mm.
The cable outlet is on the side of the housing base, by factory setting on the opposite side of the keypad.
By rotating the base, the cable can be routed out of all 4 sides.
The black wire is the connection for the thermal contact.
If the motor does not have a thermal contact, the black wire has to connected with the brown wire on the terminal board.
- Voltage Ue
- 230 V~
- Current le
- 13.5 A
- KB-04, 230 V/3s~
- Switching capacity
- 3.0 kW 230V~
- Type of actuation
- Mechanically on/off
- European standard connector (Type F, CEE 7/4 plug, CEE 7/7 plug),16A
- Housing material
- Polypropylene PP
- Mounting position
- Protection class
- IP54, splash water proof
- Connection cable
- 1 m H07RN-F 4 G1,5
- Mounting dimensions
- 68 x 68 mm
Notes on delivery times1
The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at