Float switch for draining (dry-run protection), Cable length 1,0 m.
The switch switches the pump off when a the water level is below a certain point. The switch is actuated by a ball. The shift inclination is approx. 30 °.
Dry running protection, switches off when the float is suspended.
- Switching capacity
- 10(8)A 250V~, 10(4)A 400V~
- Switching frequency:
- 50.000 switching cycles, VDE geprüft
- protection class
- protective conductor connection nach VDE 0630
- Protection class
- IP68, waterproof
- Operating temperature
- Max. 60°C
- operating pressure
- Max. 0,1 bar
- H07RN8-F 3G1 mm² , max 90°C
- Cable length
- 1,0 m
- Switching points
- On = top (floating)
Off = bottom (suspended)
The float switch is attached to the cable with a clamp. The switching path depends on the free cable length (min. 120 mm).
The free cable length must not be too short, as the cable is not sufficiently flexible. This is especially true for cold temperatures. If the length of the cable is too long, the float can float on the surface of the water without coming into the tilted position.
more cable length
more cable length dieses switchs finden Sie unter: Schwimmerschalter Leeren EHZ-FS-E (vormals Reifa ®)
Notes on delivery times1
The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at