Insert switch Klinger&Born KB-01 (Kedu KJD17B-B, DKLD DZ-6)

Details

2-pole insert switch with zero voltage release for machines and stationary power tools

Replacement for DKLD DZ-6 (note the dimensions)

The switch can be used as a replacement for the switch DKLD DZ-6 (Yue Qing Dongke Electron).
Please not the installation dimensions. There are several variations of DKLD DZ-6.

Available with and without coil connection (zero voltage release)

Due to the zero voltage release, the switch triggers on voltage drop ( power failure ) and has to be switched back on manually. Therefore it won't switch on spontaneously and uncontrollably.

With the help of the coil connection (contact A1) a zero voltage coil can be externally triggered using an emergency stop-switch or thermal contacts.

Specifications

Voltage

230V~

Rated frequency

50Hz

Operating mode

Continuous operation

Operating current Ie

AC-1 Ue:230V 16.0A, AC-3 Ue:230V 14,5A

Pole number

2 (N/O contacts)

Switching frequency

120 operations / hour

Contacts

Positively driven

Type of actuation

Mechanically on/off

Electrical service life

50.000 switching cycles

Ambient temperature

-25°C . +60°C

Protection class

Front side IP54

Mounting position

Any

Housing material

Plastic PA

Installation

Through 2 holes 4 mm

Connection

Flat plug 6.3x0,8 mm

Corresponds to

IEC947-4-1, EN60947, DIN VDE 0660 part 102

Mark of conformity

VDE-mark of conformity, Reg.Nr. 136105

Export-Info

Customs tariff number

85365080

Country of origin

China

Notes on delivery times¹

The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at Information on the calculation of the delivery date