Capacitor for starting single-phase AC motors, or floor sanders, compressors, mills.
The capacitor serves exclusively as a starting capacitor. It must not be used as an operating capacitor and must be switched off after the engine starts. The switch-off is usually carried out via relays or centrifugal switches
Cylindrical aluminum double housing with lateral 3-wire connection cable approx. 250 mm long, without base screw.
Intermittent operation AB 1.7% Duration 3 min. The duty cycle is a maximum of 1,7% of the total working cycle and corresponds to 20 evenly distributed 3-second intervals over one hour.
Technical values according to EN 60252-1 (VDE560-8)
- 250 µF ±10% nominal value
- Nominal voltage
- 320V~ 50/60Hz
- Operating mode
- Intermittent operation AB
- Operating temperature
- -10° up to +60°C
- Protection class
- IP 54
- Cable 250 mm 3G1,5
- Dimensions (Ø x length)
- 52 x 118 mm
Notes on delivery times1
The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at