AC-switch for circular saws, planing machines, shredders and other machines, which after power failure and power recovery are not allowed to turn back on.
Usable as a replacement for Kedu KOA8-11 (please note the wiring diagram)
- 2-pole switch (Contactor)
- Switching capacity up to 3 kW
- With undervoltage release
- Connection possibility for thermal contact
- Voltage Ue
- 230 V~
- Current le
- 13.5 A
- KB-04, 230 V/3s~
- Switching capacity
- 3.0 kW 230V~
- Type of actuation
- Mechanically on/off
- Housing material
- Polypropylene PP
- Mounting position
- Protection class
- IP54, splash water proof
- Connection cable
- On the mains 2 m H07RN-F 3 G1,5
Motor side 1 m H07RN-F 4G 1,5
With connection possibility of a thermal contact
- Mounting dimensions
- 68 x 68 mm
Installation / connection (refer to wiring diagram)
The switch is screwed on the housing base. Grid dimension of the screws: 68 x 68 mm.
The cable outlet is on the opposite side of the keypad.
The black wire is the connection for the thermal contact.
If the motor does not have a thermal contact, the black and brown wire have to be connected together on the terminal board.
- Customs tariff number
- Country of origin
Notes on delivery times1
The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at