AC switch-plug combination for circular saws, planing machines, shredders, wood splitters.
- 3-pole switching. Suitable for mains connection without neutral conductor
- Switching capacity up to 4 kW
- Undervoltage release with shock protection
- Phase inverter
- Connection possibility for thermal contact
- Splash water proof cover
The neutral conductor is not connected.
Not suitable for Motors with electromechanical brake and a brake magnet voltage of 230V.
Installation / connection (refer to wiring diagram) / brake
The switch is screwed on the housing base. Grid dimension of the screws: 68 x 68 mm.
The cable outlet is on the side of the housing base, by factory setting on the opposite side of the keypad.
by rotating the base, the cable can be routed to all 4 sides.
The blue wire is not a neutral conductor, it's the connection for the thermal contact.
If the motor does not have a thermal contact, the blue wire has to be connected with the grey wire on the terminal board.
- Voltage Ue
- 400 V~
- Current le
- 9,0 A
- KB-04, 400V~
- Coil voltage Uc
- Switching capacity
- 4.0 kW 400V~/AC-3
- Type of actuation
- Mechanically on/off
- CEE 3P+N+E , 16A
- Housing material
- Polypropylene PP
- Mounting position
- Protection class
- IP54, splash water proof
- Connection cable
- 1 m H07RN-F G1,5
- Mounting dimensions
- 68 x 68 mm
Feature shock protection
The contactors are mechanically activated and keep holding with a self-holding contact
Normal contactors can be actuated by hard touch-down, so that the machine will start-up by itself. This is prevented by the integrated shock protection.
Notes on delivery times1
The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at