AC switch-plug combination for circular saws, planing machines, shredders and other machines, which after power failure and power recovery are not allowed to turn back on.
- 2-pole switch (Contactor)
- Switching capacity up to 3 kW
- With undervoltage release
- Connection possibility for thermal contact
- Including splash water proof cover
Installation / connection (refer to wiring diagram)
The switch is screwed on the housing base. Grid dimension of the screws: 68 x 68 mm.
The cable outlet is on the side of the housing base, by factory setting on the opposite side of the keypad.
By rotating the base, the cable can be routed out of all 4 sides.
The brown wire is the connection for the thermal contact.
If the motor does not have a thermal contact, the brown wire has to be connected together with the grey wire on the terminal board.
- Voltage Ue
- 230 V~
- Current le
- 13.5 A
- KB-04, 230 V/3s~
- Switching capacity
- 3.0 kW 230V~
- Type of actuation
- Mechanically on/off
- Safety plug (Type F, CEE 7/4 plug, CEE 7/7 plug),16A
- Housing material
- Polypropylene PP
- Mounting position
- Protection class
- IP54, splash water proof
- Connection cable
- 1 m H07RN-F 4 G1,5
- Mounting dimensions
- 68 x 68 mm
Notes on delivery times1
The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at