Details
AC switch-plug combination for circular saws, planing machines, shredders and other machines, which after power failure and power recovery are not allowed to turn back on.
The switch is often usable as a Replacement for Kedu KOA7 (please refer to wiring diagram).
Properties
- 2-pole switch (Contactor)
- Switching capacity up to 3 kW
- With undervoltage release
- Connection possibility for thermal contact
- Suitable as replacement for Kedu KOA7 (refer to wiring diagram) and Atilon 361656
Important: Achten Sie auf the Coil voltage Uc
This switch is not as replacement for the switch K570/STZ/KA12 with the Modellnummer 0003.1570 suitable,
der of ein paar machines from Elektra Beckum montiert war.
Der 0003.1570 hatte ein Contactor with einer Spule Uc=400V
Installation / connection (refer to wiring diagram)
The switch wird from the Rückseite aus am housingboden verschraubt. Grid dimension of the screws: 68 x 68 mm with holes for screws DIN 7981 4,2x16.
the cable outlet is seitlich im housing gegenüber the Tastatur.
The brown wire is the connection for the thermal contact.
If the motor does not have a thermal contact, the brown wire has to be connected together with the grey wire on the terminal board.
Specifications
- Voltage Ue
- 230 V~
- Current le
- 13.5 A
- Contactor
- KB-04, 230 V/3s~
- Switching capacity
- 3.0 kW 230V~
- Type of actuation
- Mechanically on/off
- Connector
- Safety plug (Type F, CEE 7/4 plug, CEE 7/7 plug),16A
- Housing material
- Polypropylene PP
- Mounting position
- Any
- Protection class
- IP54, splash water proof
- Connection cable
- 1 m H07RN-F 4 G1,5
- Mounting dimensions
- 68 x 68 mm, holes for screws DIN 7981 4,2x16
- Klibo-Mod.Nr.
- 0098.5710
Export-Info
- Customs tariff number
- 85362010
- Country of origin
- Deutschland
Notes on delivery times1
The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at